How yo apply tire shine properly & get a slingless gloss

How yo apply tire shine properly & get a slingless gloss

To apply tire shine properly and achieve a sling-free, glossy finish, here are the steps you should follow:

 

1. Clean the Tires Thoroughly

Wash your tires: Before applying tire shine, clean the tires thoroughly using a tire cleaner or degreaser. This removes dirt, brake dust, and any other contaminants. You can use a tire brush to scrub the sidewalls and tread to get rid of any build-up.

Dry the tires: After cleaning, make sure the tires are dry. You can either let them air dry or wipe them down with a G Force microfiber towel.

2. Choose the Right Tire Shine Product

Opt for gel-based or water-based formulas: Gel formulas tend to provide a thicker coating, and water-based products are less likely to sling off compared to solvent-based products. For a longer-lasting, non-sling shine, go with a water-based tire shine gel or spray. Use the G Force Best Tire Shine Products.

Avoid too much shine: If you prefer a subtle, matte finish, choose a low-gloss product.

3. Apply Tire Shine Properly

Spray or apply a small amount: If using a spray, lightly mist the product onto the tire's sidewall from a distance of around 6–8 inches. If using a gel, apply a thin, even layer using a foam applicator or microfiber towel. Start at the top of the tire and work your way down, making sure to coat the entire sidewall.

Even out the product: If using a spray, it’s helpful to spread the product with a microfiber towel or Tire Shine applicator. This ensures an even application and helps to reduce pooling or streaking.

4. Buff and Remove Excess Product

Buff the tire: After applying, immediately use a clean microfiber towel to buff the tire. This step is essential to help smooth out the shine, remove excess product, and prevent sling.

Use a second towel: For the best result, use a second towel to wipe off any remaining excess product. This step is key to preventing tire shine from slinging onto the car's paint or wheel wells.

5. Let It Dry

Allow the product to set and dry for 10–15 minutes. This ensures the tire shine is absorbed properly and the finish hardens a bit, so it's less likely to sling. G Force Auto Detailing Products - 007 Slingless High Gloss Tire Shine

Additional Tips to Prevent Sling:

Apply in the right conditions: Avoid applying tire shine in direct sunlight or when the tires are hot from driving. Apply it in the shade, or let the car cool down.

Use a thin layer: Applying too much product can increase the likelihood of sling. Stick to a light coat and add more if needed.

Use a sling-free product: Some best tire shine products in Florida are designed specifically to reduce sling, so look for these formulations to make your job easier.

With these steps, you'll achieve a nice, glossy tire shine that stays in place without causing sling. 

 

https://www.youtube.com/shorts/9FQ8J1a4qaw

 

 - -  

 

How often should I apply tire shine? You should reapply tire shine when your tires start to lose their shine. The longevity of tire shine depends on the product, driving conditions, and how you drive. Some products may last up to three weeks.

How do I apply tire shine? Before applying tire shine, make sure your tires are clean and dry. Apply a thin, even layer of product with an applicator pad. You can spray the pad with product and wipe it onto your tires.

How much tire shine should I apply? Use a moderate amount of product. Applying too much can make your tires look greasy and slippery, and attract more dirt.

What should I do if I get tire shine on my rims? Wipe away any drips that fall on your rims after the product has dried.

What type of applicator should I use? Use an applicator pad designed for automotive dressing applications. Household sponges may soak up too much product.

What type of tire shine should I use? There are many tire shine products available, including solvent-based and water-based dressings.

Does tire shine protect my tires? Yes, tire shine can protect your tires from the elements.

 

Here's a summary of key points for using tire shine effectively:

 

How often to apply: Reapply when your tires start to lose their shine, typically every 1–3 weeks depending on conditions and product type.

How to apply: Clean and dry the tires first, then apply a thin, even layer with an applicator pad. Spray the pad with product and wipe it onto the tire.

How much to apply: Use a moderate amount—overapplication can lead to a greasy look and attract dirt.

If it gets on rims: Wipe away any excess product from the rims after it dries to prevent staining.

Applicator: Use an applicator pad designed for tire products, avoiding household sponges that might absorb too much product.

Type of tire shine: Choose between solvent-based or water-based options, depending on your preference.

Protection: Tire shine can provide some protection against the elements, helping to keep tires looking new longer.

Back to blog